LPG, natural gas and other compressed gases — such as CO2, nitrogen, oxygen and hydrogen — travel on board industrial vehicles equipped for this purpose: MEGCs, tube trailers and dangerous goods tankers. They are complemented by gas loading, unloading and storage systems.
In each of these settings, gas flows through valves that work in direct contact with the fluid. Their selection involves the compatibility of materials, tightness at high pressures and the safety and reliability requirements set by European and international regulations, starting with the TPED directive on transportable pressure equipment.
Among LPG valves and valves for compressed gases there is, therefore, no single solution, but rather different models, to be evaluated according to the intended use and, when needed, automated with a pneumatic actuator.
For this application, we at OMAL offer two ball valves, which differ in performance, sizes and construction.
The KRATOS is classified as a high pressure ball valve: designed for PN 413 (6,000 PSI), it is available from DN8 to DN50 (1/4" to 2"), with an A350-LF2 carbon steel or 316 stainless steel body and a PEEK seat.
The MAGNUM Wafer, on the other hand, belongs to the wafer ball valve category: it covers sizes from DN15 to DN100 (1/2" to 4"), in pressure classes PN 16-40 and ANSI 150-300, with an A105 carbon steel or 316 stainless steel body, in both bar stock and cast versions.
For automation, the AGO is our aluminum, quarter-turn ATEX pneumatic actuator with a scotch yoke mechanism, available in double acting (from 8 to 8,000 Nm, or 70 to 70,806 in-lbs) and spring return (from 15 to 4,000 Nm, or 133 to 35,403 in-lbs) versions. The AGO Handwheel version integrates a handwheel.
|
Product |
Type |
Sizes |
Pressure or torque |
Body material |
|
KRATOS |
High pressure ball valve, TPED ISO 23826 |
DN8 ÷ DN50 (1/4" ÷ 2") |
PN 413 (6,000 PSI) |
A350-LF2 carbon steel, 316 stainless steel |
|
MAGNUM Wafer |
Wafer ball valve, TPED EN 14432 |
DN15 ÷ DN100 (1/2" ÷ 4") |
PN 16-40, ANSI 150-300 |
A105 carbon steel, 316 stainless steel |
|
AGO |
Scotch yoke pneumatic actuator |
DA 8 ÷ DA 8000, SR 15 ÷ SR 4000 |
8 ÷ 8,000 Nm (DA), 15 ÷ 4,000 Nm (SR) |
Aluminum |
|
AGO Handwheel |
Pneumatic actuator with integrated handwheel |
DANV and SRNV |
60 ÷ 3,840 Nm (DANV), 30 ÷ 1,920 Nm (SRNV) |
Aluminum |
Our gas ball valves are used with LPG, natural gas (CNG), CO2 and nitrogen and, on request, also with oxygen and hydrogen. The most representative use cases include:
● Compressed gas tube trailers and MEGCs: equipment for compressed gas transportation, in which the KRATOS can be integrated thanks to its ISO 23826 qualification.
● Gas loading and unloading systems: these also fall within the scope of the same standard.
● Tank vehicles: on an LPG tanker, an LPG trailer or a propane tanker, as on other means of transport for dangerous goods, filling and emptying valves fall under EN 14432, the standard to which the MAGNUM Wafer is certified.
● Storage systems: the KRATOS is also suitable for integration into facilities that store gas.
The TPED is the European directive dedicated to transportable pressure equipment.
For a valve, compliance does not rely on a single standard: it is demonstrated through specific technical standards, which vary depending on the vehicle or system on which the component is installed.
As mentioned, each of our two ball valves follows one of these standards.
The KRATOS is qualified to ISO 23826:2021, which covers the use of valves in gas transport equipment such as multiple element gas containers (MEGCs), tube trailers and loading and unloading systems: it is this qualification that also makes it suitable for integration into storage facilities. The MAGNUM Wafer, on the other hand, is certified to EN 14432:2014, which sets the requirements for filling and emptying valves on tanks carrying dangerous goods.
Alongside TPED, the KRATOS and MAGNUM Wafer are ATEX ball valves and, like the AGO actuator, can be used in explosive atmospheres (Ex CE/UKCA).
The complete picture depends on the individual component and the selected version, because these are product certifications, as summarized in the table.
|
Certification |
Products |
|
TPED to ISO 23826:2021 |
KRATOS |
|
TPED to EN 14432:2014 |
MAGNUM Wafer |
|
Ex CE/UKCA (ATEX) |
KRATOS, MAGNUM Wafer, AGO |
|
PED (Pressure Equipment CE/UKCA) |
KRATOS, MAGNUM Wafer |
|
SIL up to SIL3 |
KRATOS, MAGNUM Wafer, AGO |
|
Fire Safe |
KRATOS, MAGNUM Wafer |
|
Fugitive Emission |
KRATOS, MAGNUM Wafer |
|
TA Luft |
MAGNUM Wafer |
For anyone equipping an industrial vehicle, the decision concerns not only the valve itself, but also the actuator that operates it, the materials that preserve its integrity over time and the space it takes up on board. OMAL responds on three fronts.
The first is the valve-actuator assembly. Since 1981, we have designed and manufactured both components in the same facility, and we can supply them already coupled and sized, with the actuator selected according to the required torque. For the vehicle builder, this means a single manufacturer and one technical contact.
The second concerns materials. In an LPG valve, as in a natural gas ball valve or any valve for compressed gases, compatibility with the fluid directly affects safety and service life: that is why we manufacture our products in carbon steel, stainless steel and special alloys, choosing the configuration best suited to each application. For hydrogen, for example, we select solutions that minimize embrittlement.
The third is reducing weight and footprint. On industrial vehicles, every component adds to the total mass of the installation, which is why compactness and low weight are essential requirements. We therefore design valves with reduced dimensions, without compromising reliability, and we direct our construction choices, such as casting, toward the same goal. One example is the MAGNUM Wafer, our most compact ball valve: its cast version, particularly valued in this respect, helps make the vehicle lighter.
Want to learn more about the complete range of valves and actuators for LPG and compressed gas transport?
The application requires components that ensure safety, reliability and tightness at high pressures. OMAL offers two TPED-compliant ATEX valves: the KRATOS, designed for PN 413 (6,000 PSI), which in its 316 stainless steel version is a high pressure stainless steel ball valve, and the MAGNUM Wafer, a wafer ball valve from DN15 to DN100. Both can be automated with AGO pneumatic actuators.
It is compliance with the European directive on transportable pressure equipment, demonstrated through different technical standards for each application. The KRATOS meets the requirements of ISO 23826:2021, which covers MEGCs, tube trailers and gas loading and unloading systems. The MAGNUM Wafer, on the other hand, is certified to EN 14432:2014, which concerns filling and emptying valves for tanks.
The KRATOS and MAGNUM Wafer can be used as LPG and CNG valves, as well as with CO2 and nitrogen. On request, they are also available for oxygen and hydrogen.
Yes. Thanks to the ISO 5211 mounting flange, the AGO pneumatic scotch yoke actuator can be installed directly on the KRATOS and MAGNUM Wafer, in double acting or spring return versions, including the AGO Handwheel version with integrated handwheel. This actuator is also certified ATEX and SIL up to SIL3.